Briquetting technology, briquette production process practice

December 10, 2018 by frank frank No Comments

Why make metallurgical briquette by cold briquetting process

With the development of the global economy, the gradual depletion of various mineral resources, besides, it also caused a variety of serious environmental problems, these have become factors that constrain the development of the global economy.

Countries all over the world are now doing a lot of work in environmental comprehensive management and developing circular economy. Now the global mainstream is the development and application of energy saving and emission reduction technologies.

Metallurgical briquette producing is an important part of the metallurgical process.

different shapes briquettes of roller briquetting press

December 5, 2018 by frank frank No Comments

Samples of materials that can be used on a roller briquetting press

CHEMICAL AREA

Additives for plastic and pneumatic industry :

Vulcanizing agents
Anti-UV Anti-oxidizing agents
Amine derivates
Stabilizers
Stearates

Detergents :

Formula for dish-washers
Formula for washing machines
Formulation agents (STPP, perborate…)

December 3, 2018 by frank frank No Comments

How to make biomass briquette and pellet – biofuel technology

Biomass energy is the fourth energy resource in the world after coal, oil and natural gas.

Unlike other highly utilized energy sources, biomass is a renewable energy source.

There are various types of biomass, such as agricultural production waste, forestry waste and flammable biomass can be used as biomass fuels, which are rich in source and easily accessible.

Moreover, the production and processing of biomass forming fuel are convenient, the use and operation are simple, the economic benefits are considerable, and it is harmless and pollution-free. Therefore, the research and promotion of biomass fuel briquetting or pelletizing have great social and economic benefits.

November 29, 2018 by frank frank No Comments

Why coke briquette better than metallurgical coke when using in casting

Coke briquette is a kind of fuel briquette that can be used as the blast furnace coke instead of metallurgical coke. It can also be used in casting (including steelmaking and iron), fertilizer, gasification and civil industries.

Coke briquette comes from the coke briquetting process, the way which uses a coke briquetting machine to briquette unbonded coal, weakly cohesive coal or coke fine, the utilization rate is as high as 70% to 90%.

The production of coke briquettes by coke process technology is very meaningful and promising in today’s shortage of high-quality coking coal resources.

November 26, 2018 by frank frank No Comments

Coal briquetting technology – process, binder and the briquette machine

why doing coal briquetting

Coal briquetting is a process which turn the coal dust to briquette. Compare to directly use coal dust as fuel, use coal briquette not only helps to reduce the burning cost (reduce 20-30% of coal dust usage), but also makes benefit to the environment.

So, how can we make briquette from the coal dust, what things should we pay attention to on the briquetting process, follow our article and you’ll find your own way on coal briquetting.

Coal briquetting process

A simple coal briquetting process normally follow the way below

bio wood waste waiting for drying beside a dryer

November 22, 2018 by frank frank No Comments

How moisture affects the biomass briquetting process

The biomass briquetting technology is a technique for compressing various loose biomass raw materials into a certain shape, big strength and density fuel briquette by heating and pressing techniques.

Common biomass waste includes sawdust, wood shavings, wood flour, crop straw, rice husk, etc.

The high moisture, irregular shape and size, and low bulk density of biomass feedstocks make it difficult to process, transport, store and utilize.

But when these biomass materials are processed into briquettes, the density is greatly improved, and the cost of transportation and storage is reduced.

November 19, 2018 by frank frank No Comments

5 factors that will affect biomass fuel briquetting process and quality

There are many factors that will affect the biomass briquetting process, everyone who is making biomass briquette from biomass briquetting machine wants to improve the quality of the briquette, so what are the factors affect the biomass process and the quality? Mainly the factors are as follow:

Raw material types

The briquetting properties of different types of raw materials vary widely.

The type of raw material not only affects the briquette quality, such as the density, strength, and calorific value, but also affects the output and power consumption of the briquetting machine.

Among a large number of agricultural and forestry wastes, some plants are easy to be compressed and briquetted after being crushed, and some are more difficult.